SOTO AirSta ST-940 Base + Wing M

SOTO AirSTa ST-940, a futuristic ‘bonfire stand’ that makes it easy to ignite firewood. Ignition of firewood becomes easy by taking in air from under the center cylinder. With detachable wings (fire bed), you can change the size of the wing according to your need.

Specification:

• Material:
  Base: Aluminium
  Fin Cap: Stainless Steel
  Under Tray: Iron
  Wing: Stainless Steel
• Size:
  Base: In use: width 25 × depth 25 × height 21.5cm; When packed: width 10 × depth 34 × height 21.5cm
  Fin Cap: width 10.6 × depth 10.6 × height 4.2cm
  Under Tray: width 27.4 × depth 27.4 × height 0.7cm
  Wing L: width 45 × depth 45 × height 28.5cm
  Wing M: width 35 × depth 35 × height 25.5cm
  
• Weight:
  Base: 1650 g
  Fin Cap: 100g
  Under Tray: 650g
  Wing L: 505g (per piece)
  Wing M: 315g (per piece)
• Maximum Load: 15kg (Weight concentrated on center. If the load is unbalanced, it may tip over and cause danger)
• Set Includes: AirSta Base, Fin Cap, Under Tray, Storage Bag, Wing (M or L)
• Made in Taiwan

PRECAUTION:

• Please be careful of the end of embers after use. Make sure that it is completely burned out and the fire bed has cooled, then dispose of the ash, and clean it up.
• If water is applied to the equipment to extinguish the fire, the equipment may be deformed due to sudden temperature changes. Also, please note that high-temperature steam is generated and there is a risk of burns.
• The product may be deformed or discolored by heat. Please note that.
• When cleaning after use, wear rubber gloves and be careful not to get injured by sharp edges.
• Make sure the bonfire is completely cooled before storing.